.\" Copyright (c) 1980 Regents of the University of California.
.\" All rights reserved.  The Berkeley software License Agreement
.\" specifies the terms and conditions for redistribution.
.\"
.\"	@(#)si.4	6.2 (Berkeley) 8/20/87
.\"
.TH SI 4 "August 20, 1987"
.UC 2
.SH NAME
si \- SI 9500/CDC 9766 moving head disk
.SH SYNOPSIS
.ft B
.nf
/sys/conf/SYSTEM:
	NSI	\fIsi_drives\fP	# SI 9500 driver for CDC 9766 disks

/etc/dtab:
.ta .5i +\w'#Name 'u +\w'Unit# 'u +\w'177777 'u +\w'Vector 'u +\w'Br 'u +\w'xxxxxxx 'u +\w'xxxxxxx 'u
	#Name	Unit#	Addr	Vector	Br	Handler(s)		# Comments
	si	?	176700	170	5	siintr		# si9500
.DT

major device number(s):
	raw: 18
	block: 9
minor device encoding:
	bits 0007 specify partition of SI drive
	bits 0070 specify SI drive
.fi
.ft R
.SH DESCRIPTION
Files with minor device numbers 0 through 7 refer to various portions
of drive 0;
minor devices 8 through 15 refer to drive 1, etc.
The standard device names begin with ``si'' followed by
the drive number and then a letter a-h for partitions 0-7 respectively.
The character ? stands here for a drive number in the range 0-7.
.PP
The block files access the disk via the system's normal
buffering mechanism and may be read and written without regard to
physical disk records.  There is also a `raw' interface
which provides for direct transmission between the disk
and the user's read or write buffer.
A single read or write call results in exactly one I/O operation
and therefore raw I/O is considerably more efficient when
many words are transmitted.  The names of the raw files
conventionally begin with an extra `r.'
.PP
In raw I/O the buffer must begin on a word (even) boundary,
and counts should be a multiple of 512 bytes (a disk sector).
Likewise
.I seek
calls should specify a multiple of 512 bytes.
.SH "DISK SUPPORT"
The origin and size (in sectors) of the
pseudo-disks on each drive are as follows:
.PP
.nf
.ta .5i +\w'disk  'u +\w'000000  'u +\w'000000  'u +\w'000 - 000  'u
.ne 10
SI 9500/CDC9766 partitions:
	disk	 start	length	     cyls	comments
	xp?a	     0	  9120	  0 -  14	/
	xp?b	  9120	  9120	 15 -  29	swap
	xp?c	 18240	234080	 30 - 414
	xp?d	252320	247906	415 - 822*
	xp?e	 18240	164160	 30 - 299	/usr
	xp?f	182400	152000	300 - 549
	xp?g	334400	165826	550 - 822*
	xp?h	     0	500384	  0 - 822	whole pack
.PP
.DT
.fi
.PP
Those partitions marked with an asterisk (``*'') actually stop short of the
indicated ending cylinder to protect any bad block forwarding information
on the packs.  The indicated lengths are correct.  Partition ``h'' must be
used to access the bad block forwarding area.
.B N.B.:
the
.I si
driver does not support bad block forwarding; the space is reserved in the
event bad block forwarding is ever added to the driver.
.SH FILES
.ta \w'/dev/MAKEDEV.local  'u
/dev/si[0-7][a-h]	block files
.br
/dev/rsi[0-7][a-h]	raw files
.br
/dev/MAKEDEV	script to create special files
.br
/dev/MAKEDEV.local	script to localize special files
.SH SEE ALSO
hk(4),
ra(4),
ram(4),
rk(4),
rl(4),
rp(4),
rx(4),
xp(4),
dtab(5),
autoconfig(8)
.SH DIAGNOSTICS
\fBsi%d%c: hard error sn%d cnr=%b err=%b\fR.  An unrecoverable
error occurred during transfer of the specified sector of the specified
disk partition.  The contents of the two error registers are also printed
in octal and symbolically with bits decoded.
The error was either unrecoverable, or a large number of retry attempts
(including offset positioning and drive recalibration) could not
recover the error.
.PP
\fBsi%d%c: hard error sn%d ssr=%b err=%b\fR.  An unrecoverable
error occurred during transfer of the specified sector of the specified
disk partition.  The contents of the two error registers are also printed
in octal and symbolically with bits decoded.
The error was either unrecoverable, or a large number of retry attempts
(including offset positioning and drive recalibration) could not
recover the error.
.SH BUGS
In raw I/O
.I read
and
.IR write (2)
truncate file offsets to 512-byte block boundaries,
and
.I write
scribbles on the tail of incomplete blocks.
Thus,
in programs that are likely to access raw devices,
.I read, write
and
.IR lseek (2)
should always deal in 512-byte multiples.
.PP
The partition tables for the file systems should be read off of each
pack, as they are never quite what any single installation would prefer,
and this would make packs more portable.