.if n .ds ua \o'^|'
.if t .ds ua \(ua
.if n .ds aa '
.if t .ds aa \(aa
.if n .ds ga `
.if t .ds ga \(ga
.if t .tr *\(**
.TH OLDCSH 1
.UC
.SH NAME
oldcsh \- a shell (command interpreter) with C-like syntax
.SH SYNOPSIS
.B oldcsh
[
.B \-cef\^instvVxX
] [
arg ...
]
.SH DESCRIPTION
.I Oldcsh
is a command language interpreter
similar to
.IR csh (1)
but without its process control facilities.
It begins by executing commands from the file `.cshrc'
in the
.I home
directory of the invoker.
If this is a login shell then it also executes commands from the file
`.login' there.
In the normal case, the shell will then begin reading commands from the
terminal, prompting with `% '.
Processing of arguments and the use of the shell to process files
containing command scripts will be described later.
.PP
The shell then repeatedly performs the following actions:
a line of command input is read and broken into
.I words.
This sequence of words is placed on the command history list and then parsed.
Finally each command in the current line is executed.
.PP
When a login shell terminates it executes commands from the file `.logout'
in the users home directory.
.PP
.B "Lexical structure"
.PP
The shell splits input lines into words at blanks and tabs with the
following exceptions.
The characters
`&' `|' `;' `<' `>' `(' `)'
form separate words.
If doubled in `&&', `|\|\||', `<<' or `>>' these pairs form single words.
These parser metacharacters may be made part of other words, or prevented their
special meaning, by preceding them with `\e'.
A newline preceded by a `\e' is equivalent to a blank.
.PP
In addition strings enclosed in matched pairs of quotations,
`\*(aa', `\*(ga' or `"',
form parts of a word; metacharacters in these strings, including blanks
and tabs, do not form separate words.
These quotations have semantics to be described subsequently.
Within pairs of `\' or `"' characters a newline preceded by a `\e' gives
a true newline character.
.PP
When the shell's input is not a terminal,
the character `#' introduces a comment which continues to the end of the
input line.
It is prevented this special meaning when preceded by `\e'
and in quotations using `\`', `\'', and `"'.
.PP
.B Commands
.PP
A simple command is a sequence of words, the first of which
specifies the command to be executed.
A simple command or
a sequence of simple commands separated by `|' characters
forms a pipeline.
The output of each command in a pipeline is connected to the input of the next.
Sequences of pipelines may be separated by `;', and are then executed
sequentially.
A sequence of pipelines may be executed without waiting for it to terminate
by following it with an `&'.
Such a sequence is automatically prevented from being terminated by
a hangup signal; the
.I nohup
command need not be used.
.PP
Any of the above may be placed in `(' `)' to form a simple command (which
may be a component of a pipeline, etc.)
It is also possible to separate pipelines with `|\|\||' or `&&' indicating,
as in the C language,
that the second is to be executed only if the first fails or succeeds
respectively. (See
.I Expressions.)
.PP
.B Substitutions
.PP
We now describe the various transformations the shell performs on the
input in the order in which they occur.
.PP
.B "History substitutions"
.PP
History substitutions can be used to reintroduce sequences of words
from previous commands, possibly performing modifications on these words.
Thus history substitutions provide a generalization of a
.I redo
function.
.PP
History substitutions begin with the character `!' and may begin
.B anywhere
in the input stream if a history substitution is not already in progress.
This `!' may be preceded by an `\e' to prevent its special meaning;
a `!' is passed unchanged when it is followed by a blank,
tab, newline, `=' or `('.
History substitutions also occur when an input line begins with `\*(ua'.
This special abbreviation will be described later.
.PP
Any input line which contains history substitution is echoed on the terminal
before it is executed as it could have been typed without history substitution.
.PP
Commands input from the terminal which consist of one or more words
are saved on the history list,
the size of which is controlled by the
.I history
variable.
The previous command is always retained.
Commands are numbered sequentially from 1.
.PP
For definiteness, consider the following output from the history command:
.PP
.DT
.br
	\09  write michael
.br
	10  ex write.c
.br
	11  cat oldwrite.c
.br
	12  diff *write.c
.PP
The commands are shown with their event numbers.
It is not usually necessary to use event numbers, but the current event
number can be made part of the
.I prompt
by placing an `!' in the prompt string.
.PP
With the current event 13 we can refer to previous events by event
number `!11', relatively as in `!\-2' (referring to the same event),
by a prefix of a command word
as in `!d' for event 12 or `!w' for event 9, or by a string contained in
a word in the command as in `!?mic?' also referring to event 9.
These forms, without further modification, simply reintroduce the words
of the specified events, each separated by a single blank.
As a special case `!!' refers to the previous command; thus `!!'
alone is essentially a
.I redo.
The form `!#' references the current command (the one being typed in).
It allows a word to be selected from further left
in the line, to avoid retyping a long name, as in `!#:1'.
.PP
To select words from an event we can follow the event specification by
a `:' and a designator for the desired words.
The words of a input line are numbered from 0,
the first (usually command) word being 0, the second word (first argument)
being 1, etc.
The basic word designators are:
.PP
.DT
.nf
	0	first (command) word
	\fIn\fP	\fIn\fP\|'th argument
	\*(ua	first argument,  i.e. `1'
	$	last argument
	%	word matched by (immediately preceding) ?\fIs\fP\|? search
	\fIx\fP\|\-\fIy\fP	range of words
	\-\fIy\fP	abbreviates `0\-\fIy\fP\|'
	*	abbreviates `\*(ua\-$', or nothing if only 1 word in event
	\fIx\fP\|*	abbreviates `\fIx\fP\|\-$'
	\fIx\fP\|\-	like `\fIx\fP\|*' but omitting word `$'
.fi
.PP
The `:' separating the event specification from the word designator
can be omitted if the argument selector begins with a `\*(ua', `$', `*'
`\-' or `%'.
After the optional word designator can be
placed a sequence of modifiers, each preceded by a `:'.
The following modifiers are defined:
.DT
.PP
.nf
	h		Remove a trailing pathname component, leaving the head.
	r		Remove a trailing `.xxx' component, leaving the root name.
	s/\fIl\fP\|/\fIr\fP\|/		Substitute \fIl\fP for \fIr\fP
	t		Remove all leading pathname components, leaving the tail.
	&		Repeat the previous substitution.
	g		Apply the change globally, prefixing the above, e.g. `g&'.
	p		Print the new command but do not execute it.
	q		Quote the substituted words, preventing further substitutions.
	x		Like q, but break into words at blanks, tabs and newlines.
.fi
.PP
Unless preceded by a `g' the modification is applied only to the first
modifiable word.  In any case it is an error for no word to be applicable.
.PP
The left hand side of substitutions are not regular expressions in the sense
of the editors, but rather strings.
Any character may be used as the delimiter in place of `/';
a `\e' quotes the delimiter into the
.IR l ""
and
.IR r ""
strings.
The character `&' in the right hand side is replaced by the text from
the left.
A `\e' quotes `&' also.
A null
.IR l ""
uses the previous string either from a
.IR l ""
or from a
contextual scan string
.IR s ""
in `!?\fIs\fP\|?'.
The trailing delimiter in the substitution may be omitted if a newline
follows immediately as may the trailing `?' in a contextual scan.
.PP
A history reference may be given without an event specification, e.g. `!$'.
In this case the reference is to the previous command unless a previous
history reference occurred on the same line in which case this form repeats
the previous reference.
Thus `!?foo?\*(ua !$' gives the first and last arguments
from the command matching `?foo?'.
.PP
A special abbreviation of a history reference occurs when the first
non-blank character of an input line is a `\*(ua'.
This is equivalent to `!:s\*(ua' providing a convenient shorthand for substitutions
on the text of the previous line.
Thus `\*(ualb\*(ualib' fixes the spelling of 
`lib'
in the previous command.
Finally, a history substitution may be surrounded with `{' and `}'
if necessary to insulate it from the characters which follow.
Thus, after `ls \-ld ~paul' we might do `!{l}a' to do `ls \-ld ~paula',
while `!la' would look for a command starting `la'.
.PP
.if n .ul
\fBQuotations\ with\ \'\ and\ "\fP
.PP
The quotation of strings by `\'' and `"' can be used
to prevent all or some of the remaining substitutions.
Strings enclosed in `\'' are prevented any further interpretation.
Strings enclosed in `"' are yet variable and command expanded
as described below.
.PP
In both cases the resulting text becomes (all or part of) a single word;
only in one special case (see
.I "Command Substitution"
below) does a `"' quoted string yield parts of more than one word;
`\' quoted strings never do.
.PP
.B "Alias substitution"
.PP
The shell maintains a list of aliases which can be established, displayed
and modified by the
.I alias
and
.I unalias
commands.
After a command line is scanned, it is parsed into distinct commands and
the first word of each command, left-to-right, is checked to see if it
has an alias.
If it does, then the text which is the alias for that command is reread
with the history mechanism available
as though that command were the previous input line.
The resulting words replace the
command and argument list.
If no reference is made to the history list, then the argument list is
left unchanged.
.PP
Thus if the alias for `ls' is `ls \-l' the command `ls /usr' would map to
`ls \-l /usr', the argument list here being undisturbed.
Similarly if the alias for `lookup' was `grep !\*(ua /etc/passwd' then
`lookup bill' would map to `grep bill /etc/passwd'.
.PP
If an alias is found, the word transformation of the input text
is performed and the aliasing process begins again on the reformed input line.
Looping is prevented if the first word of the new text is the same as the old
by flagging it to prevent further aliasing.
Other loops are detected and cause an error.
.PP
Note that the mechanism allows aliases to introduce parser metasyntax.
Thus we can `alias print \'pr \e!* \||\| lpr\'' to make a command which
.I pr's
its arguments to the line printer.
.PP
.B "Variable substitution"
.PP
The shell maintains a set of variables, each of which has as value a list
of zero or more words.
Some of these variables are set by the shell or referred to by it.
For instance, the
.I argv
variable is an image of the shell's argument list, and words of this
variable's value are referred to in special ways.
.PP
The values of variables may be displayed and changed by using the
.I set
and
.I unset
commands.
Of the variables referred to by the shell a number are toggles;
the shell does not care what their value is,
only whether they are set or not.
For instance, the
.I verbose
variable is a toggle which causes command input to be echoed.
The setting of this variable results from the
.B \-v
command line option.
.PP
Other operations treat variables numerically.
The `@' command permits numeric calculations to be performed and the result
assigned to a variable.
Variable values are, however, always represented as (zero or more) strings.
For the purposes of numeric operations, the null string is considered to be
zero, and the second and subsequent words of multiword values are ignored.
.PP
After the input line is aliased and parsed, and before each command
is executed, variable substitution
is performed keyed by `$' characters.
This expansion can be prevented by preceding the `$' with a `\e' except
within `"'s where it
.B always
occurs, and within `\'s where it
.B never
occurs.
Strings quoted by `\*(ga' are interpreted later (see
.I "Command substitution"
below) so `$' substitution does not occur there until later, if at all.
A `$' is passed unchanged if followed by a blank, tab, or end-of-line.
.PP
Input/output redirections are recognized before variable expansion,
and are variable expanded separately.
Otherwise, the command name and entire argument list are expanded together.
It is thus possible for the first (command) word to this point to generate
more than one word, the first of which becomes the command name,
and the rest of which become arguments.
.PP
Unless enclosed in `"' or given the `:q' modifier the results of variable
substitution may eventually be command and filename substituted.
Within `"' a variable whose value consists of multiple words expands to a
(portion of) a single word, with the words of the variables value
separated by blanks.
When the `:q' modifier is applied to a substitution
the variable will expand to multiple words with each word separated
by a blank and quoted to prevent later command or filename substitution.
.PP
The following metasequences are provided for introducing variable values into
the shell input.
Except as noted, it is an error to reference a variable which is not set.
.HP 5
$name
.br
.ns
.HP 5
${name}
.br
Are replaced by the words of the value of variable
.I name,
each separated by a blank.
Braces insulate
.I name
from following characters which would otherwise be part of it.
Shell variables have names consisting of up to 20 letters, digits,
and underscores.
.PP
If
.I name
is not a shell variable,
but is set in the environment,
then that value is returned
(but : modifiers and the other forms given below are not
available in this case).
.HP 5
$name[selector]
.br
.ns
.HP 5
${name[selector]}
.br
May be used to select only some of the words from the value of
.I name.
The selector is subjected to `$' substitution and may consist of a single
number or two numbers separated by a `\-'.
The first word of a variables value is numbered `1'.
If the first number of a range is omitted it defaults to `1'.
If the last member of a range is omitted it defaults to `$#name'.
The selector `*' selects all words.
It is not an error for a range to be empty if the second argument is omitted
or in range.
.HP 5
$#name
.br
.ns
.HP 5
${#name}
.br
Gives the number of words in the variable.
This is useful for later use in a `[selector]'.
.HP 5
$0
.br
Substitutes the name of the file from which command input is being read.
An error occurs if the name is not known.
.HP 5
$number
.br
.ns
.HP 5
${number}
.br
Equivalent to `$argv[number]'.
.HP 5
$*
.br
Equivalent to `$argv[*]'.
.PP
The modifiers `:h', `:t', `:r', `:q' and `:x' may be applied to
the substitutions above as may `:gh', `:gt' and `:gr'.
If braces `{' '}' appear in the command form then the modifiers
must appear within the braces.
.B  "The current implementation allows only one `:' modifier on each `$' expansion."
.PP
The following substitutions may not be modified with `:' modifiers.
.HP 5
$?name
.br
.ns
.HP 5
${?name}
.br
Substitutes the string `1' if name is set, `0' if it is not.
.HP 5
$?0
.br
Substitutes `1' if the current input filename is know, `0' if it is not.
.HP 5
$$
.br
Substitute the (decimal) process number of the (parent) shell.
.PP
.B "Command and filename substitution"
.PP
The remaining substitutions, command and filename substitution,
are applied selectively to the arguments of builtin commands.
This means that portions of expressions which are not evaluated are
not subjected to these expansions.
For commands which are not internal to the shell, the command
name is substituted separately from the argument list.
This occurs very late,
after input-output redirection is performed, and in a child
of the main shell.
.PP
.B "Command substitution"
.PP
Command substitution is indicated by a command enclosed in `\*(ga'.
The output from such a command is normally broken into separate words
at blanks, tabs and newlines, with null words being discarded,
this text then replacing the original string.
Within `"'s, only newlines force new words; blanks and tabs are preserved.
.PP
In any case, the single final newline does not force a new word.
Note that it is thus possible for a command substitution to yield
only part of a word, even if the command outputs a complete line.
.PP
.B "Filename substitution"
.PP
If a word contains any of the characters `*', `?', `[' or `{'
or begins with the character `~', then that word is a candidate for
filename substitution, also known as `globbing'.
This word is then regarded as a pattern, and replaced with an alphabetically
sorted list of file names which match the pattern.
In a list of words specifying filename substitution it is an error for
no pattern to match an existing file name, but it is not required
for each pattern to match.
Only the metacharacters `*', `?' and `[' imply pattern matching,
the characters `~' and `{' being more akin to abbreviations.
.PP
In matching filenames, the character `.' at the beginning of a filename
or immediately following a `/', as well as the character `/' must
be matched explicitly.
The character `*' matches any string of characters, including the null
string.
The character `?' matches any single character.
The sequence `[...]' matches any one of the characters enclosed.
Within `[...]',
a pair of characters separated by `\-' matches any character lexically between
the two.
.PP
The character `~' at the beginning of a filename is used to refer to home
directories.
Standing alone, i.e. `~' it expands to the invokers home directory as reflected
in the value of the variable
.I home.
When followed by a name consisting of letters, digits and `\-' characters
the shell searches for a user with that name and substitutes their
home directory;  thus `~ken' might expand to `/usr/ken' and `~ken/chmach'
to `/usr/ken/chmach'.
If the character `~' is followed by a character other than a letter or `/'
or appears not at the beginning of a word,
it is left undisturbed.
.PP
The metanotation `a{b,c,d}e' is a shorthand for `abe ace ade'.
Left to right order is preserved, with results of matches being sorted
separately at a low level to preserve this order.
This construct may be nested.
Thus `~source/s1/{oldls,ls}.c' expands to
`/usr/source/s1/oldls.c /usr/source/s1/ls.c'
whether or not these files exist without any chance of error
if the home directory for `source' is `/usr/source'.
Similarly `../{memo,*box}' might expand to `../memo ../box ../mbox'.
(Note that `memo' was not sorted with the results of matching `*box'.)
As a special case `{', `}' and `{}' are passed undisturbed.
.PP
.B Input/output
.PP
The standard input and standard output of a command may be redirected
with the following syntax:
.HP 5
< name
.br
Open file
.I name
(which is first variable, command and filename expanded) as the standard
input.
.HP 5
<< word
.br
Read the shell input up to a line which is identical to
.I word.
.I Word
is not subjected to variable, filename or command substitution,
and each input line is compared to
.I word
before any substitutions are done on this input line.
Unless a quoting `\e', `"', `\*(aa' or `\*(ga' appears in
.I word
variable and command substitution is performed on the intervening lines,
allowing `\e' to quote `$', `\e' and `\*(ga'.
Commands which are substituted have all blanks, tabs, and newlines
preserved, except for the final newline which is dropped.
The resultant text is placed in an anonymous temporary file which
is given to the command as standard input.
.HP 5
> name
.br
.ns
.HP 5
>! name
.br
.ns
.HP 5
>& name
.br
.ns
.HP 5
>&! name
.br
The file
.I name
is used as standard output.
If the file does not exist then it is created;
if the file exists, its is truncated, its previous contents being lost.
.IP
If the variable
.I noclobber
is set, then the file must not exist or be a character special file (e.g. a
terminal or `/dev/null') or an error results.
This helps prevent accidental destruction of files.
In this case the `!' forms can be used and suppress this check.
.IP
The forms involving `&' route the diagnostic output into the specified
file as well as the standard output.
.I Name
is expanded in the same way as `<' input filenames are.
.HP 5
>> name
.br
.ns
.HP 5
>>& name
.br
.ns
.HP 5
>>! name
.br
.ns
.HP 5
>>&! name
.br
Uses file
.I name
as standard output like `>' but places output at the end of the file.
If the variable
.I noclobber
is set, then
it is an error for the file not to exist unless
one of the `!' forms is given.
Otherwise similar to `>'.
.PP
If a command is run detached (followed by `&') then the default standard
input for the command is the empty file `/dev/null'.
Otherwise the command receives the environment in which the shell was
invoked as modified by the input-output parameters and
the presence of the command in a pipeline.
Thus, unlike some previous shells, commands run from a file of shell commands
have no access to the text of the commands by default; rather
they receive the original standard input of the shell.
The `<<' mechanism should be used to present inline data.
This permits shell command scripts to function as components of pipelines
and allows the shell to block read its input.
.PP
Diagnostic output may be directed through a pipe with the standard output.
Simply use the form `|\|&' rather than just `|'.
.PP
.B Expressions
.PP
A number of the builtin commands (to be described subsequently)
take expressions, in which the operators are similar to those of C, with
the same precedence.
These expressions appear in the
.I @,
.I exit,
.I if,
and
.I while
commands.
The following operators are available:
.DT
.PP
	|\|\||  &&  |  \*(ua  &  ==  !=  <=  >=  <  >  <<  >>  +  \-  *  /  %  !  ~  (  )
.PP
Here the precedence increases to the right,
`==' and `!=', `<=' `>=' `<' and `>', `<<' and `>>', `+' and `\-',
`*' `/' and `%' being, in groups, at the same level.
The `==' and `!=' operators compare their arguments as strings,
all others operate on numbers.
Strings which begin with `0' are considered octal numbers.
Null or missing arguments are considered `0'.
The result of all expressions are strings,
which represent decimal numbers.
It is important to note that no two components of an expression can appear
in the same word; except when adjacent to components of expressions which
are syntactically significant to the parser (`&' `|' `<' `>' `(' `)')
they should be surrounded by spaces.
.PP
Also available in expressions as primitive operands are command executions
enclosed in `{' and `}'
and file enquiries of the form `\-\fIl\fP  name' where
.I  l
is one of:
.PP
.DT
.nf
	r	read access
	w	write access
	x	execute access
	e	existence
	o	ownership
	z	zero size
	f	plain file
	d	directory
.fi
.PP
The specified name is command and filename expanded and then tested
to see if it has the specified relationship to the real user.
If the file does not exist or is inaccessible then all enquiries return
false, i.e. `0'.
Command executions succeed, returning true, i.e. `1',
if the command exits with status 0, otherwise they fail, returning
false, i.e. `0'.
If more detailed status information is required then the command
should be executed outside of an expression and the variable
.I status
examined.
.PP
.B "Control flow"
.PP
The shell contains a number of commands which can be used to regulate the
flow of control in command files (shell scripts) and
(in limited but useful ways) from terminal input.
These commands all operate by forcing the shell to reread or skip in its
input and, due to the implementation, restrict the placement of some
of the commands.
.PP
The
.I foreach,
.I switch,
and
.I while
statements, as well as the
.I if\-then\-else
form of the
.I if
statement require that the major keywords appear in a single simple command
on an input line as shown below.
.PP
If the shell's input is not seekable,
the shell buffers up input whenever a loop is being read
and performs seeks in this internal buffer to accomplish the rereading
implied by the loop.
(To the extent that this allows, backward goto's will succeed on
non-seekable inputs.)
.PP
.B "Builtin commands"
.PP
Builtin commands are executed within the shell.
If a builtin command occurs as any component of a pipeline
except the last then it is executed in a subshell.
.HP 5
.B  alias
.br
.ns
.HP 5
.BR alias " name"
.br
.ns
.HP 5
.BR alias " name wordlist"
.br
The first form prints all aliases.
The second form prints the alias for name.
The final form assigns the specified
.I wordlist
as the alias of 
.I name;
.I wordlist
is command and filename substituted.
.I Name
is not allowed to be
.I alias
or
.I unalias
.HP 5
.B  alloc
.br
Shows the amount of dynamic core in use, broken down into used and
free core, and address of the last location in the heap.
With an argument shows each used and free block on the internal dynamic
memory chain indicating its address, size, and whether it is used or free.
This is a debugging command and may not work in production versions of the
shell; it requires a modified version of the system memory allocator.
.HP 5
.B  break
.br
Causes execution to resume after the
.I end
of the nearest enclosing
.I foreach
or
.I while.
The remaining commands on the current line are executed.
Multi-level breaks are thus possible by writing them all on one line.
.HP 5
.B  breaksw
.br
Causes a break from a
.I switch,
resuming after the
.I endsw.
.HP 5
.BR case " label:"
.br
A label in a
.I switch
statement as discussed below.
.HP 5
.B  cd
.br
.ns
.HP 5
.BR cd " name"
.br
.ns
.HP 5
.B  chdir
.br
.ns
.HP 5
.BR chdir " name"
.br
Change the shells working directory to directory
.I name.
If no argument is given then change to the home directory of the user.
.PP
If
.I name
is not found as a subdirectory of the current directory
(and does not begin with `/', `./', or `../'),
then each component of the variable
.I cdpath
is checked to see if it has a subdirectory
.IR name .
Finally, if all else fails but
.I name
is a shell variable whose value begins with `/',
then this is tried to see if it is a directory.
.HP 5
.B  continue
.br
Continue execution of the nearest enclosing
.I while
or
.I foreach.
The rest of the commands on the current line are executed.
.HP 5
.B  default:
.br
Labels the default case in a
.I switch
statement.
The default should come after all
.I case
labels.
.HP 5
.BR echo " wordlist"
.br
The specified words are written to the shells standard output.
A `\ec' causes the echo to complete without printing a newline,
akin to the `\ec' in
.IR  nroff (1).
A `\en' in wordlist causes a newline to be printed.
Otherwise the words are echoed, separated by spaces.
.HP 5
.B  else
.br
.ns
.HP 5
.B  end
.br
.ns
.HP 5
.B  endif
.br
.ns
.HP 5
.B  endsw
.br
See the description of the
.I foreach,
.I if,
.I switch,
and
.I while
statements below.
.HP 5
.BR exec " command"
.br
The specified command is executed in place of the current shell.
.HP 5
.B  exit
.br
.ns
.HP 5
.BR exit (expr)
.br
The shell exits either with the value of the
.I status
variable (first form) or with the value of the specified
.I  expr
(second form).
.HP 5
.BR foreach " name (wordlist)"
.br
.ns
.HP 5
\    ...
.br
.ns
.HP 5
.B  end
.br
The variable
.I name
is successively set to each member of
.I wordlist
and the sequence of commands between this command and the matching
.I end
are executed.
(Both
.I foreach
and
.I end
must appear alone on separate lines.)
.IP
The builtin command
.I continue
may be used to continue the loop prematurely and the builtin
command
.I break
to terminate it prematurely.
When this command is read from the terminal, the loop is read up once
prompting with `?' before any statements in the loop are executed.
If you make a mistake typing in a loop at the terminal you can rub it out.
.HP 5
.BR glob " wordlist"
.br
Like
.I echo
but no `\e' escapes are recognized and words are delimited
by null characters in the output.
Useful for programs which wish to use the shell to filename expand a list
of words.
.HP 5
.BR goto " word"
.br
The specified
.I word
is filename and command expanded to yield a string of the form `label'.
The shell rewinds its input as much as possible
and searches for a line of the form `label:'
possibly preceded by blanks or tabs.
Execution continues after the specified line.
.HP 5
.BR hashstat
.br
Print a statistics line indicating how effective the internal hash
table has been at locating commands (and avoiding
.IR exec 's).
An
.I exec
is attempted for each component of the
.I path
where the hash function indicates a possible hit, and in each component
which does not begin with a ``/''.
.HP 5
.B  history
.br
Displays the history event list.
.HP 5
.BR if " (expr) command"
.br
If the specified expression evaluates true, then the single
.I  command
with arguments is executed.
Variable substitution on
.IR command ""
happens early, at the same
time it does for the rest of the
.I if
command.
.I Command
must be a simple command, not
a pipeline, a command list, or a parenthesized command list.
Input/output redirection occurs even if
.I expr
is false, when command is
.B not
executed (this is a bug).
.HP 5
.BR if " (expr) " "then"
.br
.ns
.HP 5
\    ...
.br
.ns
.HP 5
.BR else " " "if\fP (expr2) \fBthen"
.br
.ns
.HP 5
\    ...
.br
.ns
.HP 5
.B  else
.br
.ns
.HP 5
\    ...
.br
.ns
.HP 5
.B  endif
.br
If the specified
.IR expr ""
is true then the commands to the first
.I else
are executed; else if
.IR expr2 ""
is true then the commands to the
second else are executed, etc.
Any number of
.I else-if
pairs are possible; only one
.I endif
is needed.
The
.I else
part is likewise optional.
(The words
.I else
and
.I endif
must appear at the beginning of input lines;
the
.I if
must appear alone on its input line or after an
.I else.)
.HP 5
.B  login
.br
Terminate a login shell, replacing it with an instance of
.B /bin/login.
This is one way to log off, included for compatibility with
.B /bin/sh.
.HP 5
.B  logout
.br
Terminate a login shell.
Especially useful if
.I ignoreeof
is set.
.HP 5
.B  nice
.br
.ns
.HP 5
.BR nice " \+number"
.br
.ns
.HP 5
.BR nice " command"
.br
.ns
.HP 5
.BR nice " \+number command"
.br
The first form sets the
.I nice
for this shell to 4.
The second form sets the
.I nice
to the given number.
The final two forms run command at priority 4 and
.I number
respectively.
The super-user may specify negative niceness by using `nice \-number ...'.
Command is always executed in a sub-shell, and the restrictions
place on commands in simple
.I if
statements apply.
.HP 5
.B  nohup
.br
.ns
.HP 5
.B  "nohup command"
.br
The first form can be used in shell scripts to cause hangups to be
ignored for the remainder of the script.
The second form causes the specified command to be run with hangups
ignored.   On the Computer Center systems at UC Berkeley, this also
.I submits
the process.
Unless the shell is running detached,
.I nohup
has no effect.
All processes detached with ``&'' are automatically
.I nohup'ed.
(Thus,
.I nohup
is not really needed.)
.HP 5
.B  onintr
.br
.ns
.HP 5
.BR onintr "  \-"
.br
.ns
.HP 5
.BR onintr "  label"
.br
Control the action of the shell on interrupts.
The first form restores the default action of the shell on interrupts
which is to terminate shell scripts or to return to the terminal command
input level.
The second form `onintr \-' causes all interrupts to be ignored.
The final form causes the shell to execute a `goto label' when
an interrupt is received or a child process terminates because
it was interrupted.
.IP
In any case, if the shell is running detached and interrupts are
being ignored, all forms of
.I onintr
have no meaning and interrupts
continue to be ignored by the shell and all invoked commands.
.HP 5
.BR rehash
.br
Causes the internal hash table of the contents of the directories in
the
.I path
variable to be recomputed.  This is needed if new commands are added
to directories in the
.I path
while you are logged in.  This should only be necessary if you add
commands to one of your own directories, or if a systems programmer
changes the contents of one of the system directories.
.HP 5
.BR repeat " count command"
.br
The specified 
.I command
which is subject to the same restrictions
as the
.I command
in the one line
.I if
statement above,
is executed
.I count
times.
I/O redirections occurs exactly once, even if
.I count
is 0.
.HP 5
.B  set
.br
.ns
.HP 5
.BR set " name"
.br
.ns
.HP 5
.BR set " name=word"
.br
.ns
.HP 5
.BR set " name[index]=word"
.br
.ns
.HP 5
.BR set " name=(wordlist)"
.br
The first form of the command shows the value of all shell variables.
Variables which have other than a single word as value print as a parenthesized
word list.
The second form sets
.I name
to the null string.
The third form sets
.I name
to the single
.I word.
The fourth form sets
the
.I index'th
component of name to word;
this component must already exist.
The final form sets
.I name
to the list of words in
.I wordlist.
In all cases the value is command and filename expanded.
.IP
These arguments may be repeated to set multiple values in a single set command.
Note however, that variable expansion happens for all arguments before any
setting occurs.
.HP 5
.BR setenv " name value"
.br
(Version 7 systems only.)
Sets the value of environment variable
.I name
to be
.I value,
a single string.
Useful environment variables are `TERM' the type of your terminal and
`SHELL' the shell you are using.
.HP 5
.B  shift
.br
.ns
.HP 5
.BR shift " variable"
.br
The members of
.I argv
are shifted to the left, discarding
.I argv[1].
It is an error for
.I argv
not to be set or to have less than one word as value.
The second form performs the same function on the specified variable.
.HP 5
.BR source " name"
.br
The shell reads commands from
.I name.
.I Source
commands may be nested; if they are nested too deeply the shell may
run out of file descriptors.
An error in a
.I source
at any level terminates all nested
.I source
commands.
Input during 
.I source
commands is
.B never
placed on the history list.
.HP 5
.BR switch " (string)"
.br
.ns
.HP 5
.BR case " str1:"
.br
.ns
.HP 5
\    ...
.br
.ns
.HP 5
\   
.B  breaksw
.br
.ns
.HP 5
\&...
.br
.ns
.HP 5
.B  default:
.br
.ns
.HP 5
\    ...
.br
.ns
.HP 5
\   
.B  breaksw
.br
.ns
.HP 5
.B  endsw
.br
Each case label is successively matched, against the specified
.I string
which is first command and filename expanded.
The file metacharacters `*', `?' and `[...]' may be used in the case labels,
which are variable expanded.
If none of the labels match before a `default' label is found, then
the execution begins after the default label.
Each case label and the default label must appear at the beginning of a line.
The command 
.I breaksw
causes execution to continue after the
.I endsw.
Otherwise control may fall through case labels and default labels as in C.
If no label matches and there is no default, execution continues after
the
.I endsw.
.HP 5
.B  time
.br
.ns
.HP 5
.BR time " command"
.br
With no argument, a summary of time used by this shell and its children
is printed.
If arguments are given
the specified simple command is timed and a time summary
as described under the
.I time
variable is printed.
If necessary, an extra shell is created to print the time
statistic when the command completes.
.HP 5
.B umask
.br
.ns
.HP 5
.BR umask " value"
.br
The file creation mask is displayed (first form) or set to the specified
value (second form).  The mask is given in octal.  Common values for
the mask are 002 giving all access to the group and read and execute
access to others or 022 giving all access except no write access for
users in the group or others.
.HP 5
.BR unalias " pattern"
.br
All aliases whose names match the specified pattern are discarded.
Thus all aliases are removed by `unalias *'.
It is not an error for nothing to be
.I unaliased.
.HP 5
.BR unhash
.br
Use of the internal hash table to speed location of executed programs
is disabled.
.HP 5
.BR unset " pattern"
.br
All variables whose names match the specified pattern are removed.
Thus all variables are removed by `unset *'; this has noticeably
distasteful side-effects.
It is not an error for nothing to be
.I unset.
.HP 5
.B  wait
.br
All child processes are waited for.
It the shell is interactive, then an interrupt can disrupt the wait,
at which time the shell prints names and process numbers of all children
known to be outstanding.
.HP 5
.BR while " (expr)"
.br
.ns
.HP 5
\    ...
.br
.ns
.HP 5
.B  end
.br
While the specified expression evaluates non-zero, the commands between
the
.I while
and the matching end are evaluated.
.I Break
and
.I continue
may be used to terminate or continue the loop prematurely.
(The
.I while
and
.I end
must appear alone on their input lines.)
Prompting occurs here the first time through the loop as for the
.I foreach
statement if the input is a terminal.
.HP 5
.B "@"
.br
.ns
.HP 5
.BR "@" " name = expr"
.br
.ns
.HP 5
.BR "@" " name[index] = expr"
.br
The first form prints the values of all the shell variables.
The second form sets the specified
.I name
to the value of
.I expr.
If the expression contains `<', `>', `&' or `|' then at least
this part of the expression must be placed within `(' `)'.
The third form assigns the value of
.I expr
to the
.I index'th
argument of
.I name.
Both 
.I name
and its
.I index'th
component must already exist.
.IP
The operators `*=', `+=', etc are available as in C.
The space separating the name from the assignment operator is optional.
Spaces are, however, mandatory in separating components of
.I expr
which would otherwise be single words.
.IP
Special postfix `++' and `\-\-' operators increment and decrement
.I name
respectively, i.e. `@  i++'.
.PP
.B "Pre-defined variables"
.PP
The following variables have special meaning to the shell.
Of these,
.I argv,
.I child,
.I home,
.I path,
.I prompt,
.I shell
and
.I status
are always set by the shell.
Except for
.I child
and
.I status
this setting occurs only at initialization;
these variables will not then be modified unless this is done
explicitly by the user.
.PP
The shell copies the environment variable PATH into the variable
.IR path ,
and copies the value back into the environment whenever
.I path
is set.
Thus is is not necessary to worry about its setting other than
in the file
.I .cshrc
as inferior
.I oldcsh
processes will import the definition of
.I path
from the environment.
(It could be set once in the
.I .login
except that commands through
.IR net (1)
would not see the definition.)
.TP 15
.B argv
\c
Set to the arguments to the shell, it is from this variable that
positional parameters are substituted, i.e. `$1' is replaced by
`$argv[1]', etc.
.TP 15
.B cdpath
\c
Gives a list of alternate directories searched to find subdirectories in
.I chdir
commands.
.TP 15
.B child
The process number printed when the last command was forked with `&'.
This variable is
.I unset
when this process terminates.
.TP 15
.B echo
\c
Set when the
.B \-x
command line option is given.
Causes each command and its arguments
to be echoed just before it is executed.
For non-builtin commands all expansions occur before echoing.
Builtin commands are echoed before command and filename substitution,
since these substitutions are then done selectively.
.TP 15
.B histchars
\c
Can be assigned a two character string.
The first character is used as a history character
in place of ``!'', the second character is used in
place of the ``^'' substitution mechanism.
For example, ``set histchars=",;"'' will cause
the history characters to be comma and semicolon.
.TP 15
.B history
\c
Can be given a numeric value to control the size of the history list.
Any command which has been referenced in this many events will not be
discarded.
Too large values of
.I history
may run the shell out of memory.
The last executed command is always saved on the history list.
.TP 15
.B home
\c
The home directory of the invoker, initialized from the environment.
The filename expansion of `\fB~\fP' refers to this variable.
.TP 15
.B ignoreeof
\c
If set the shell ignores
end-of-file from input devices which are terminals.
This prevents shells from accidentally being killed by control-D's.
.TP 15
.B mail
\c
The files where the shell checks for mail.
This is done after each command completion which will result in a prompt,
if a specified interval has elapsed.
The shell says `You have new mail.'
if the file exists with an access time not greater than its modify time.
.IP
If the first word of the value of
.I mail
is numeric it specifies a different mail checking interval, in seconds,
than the default, which is 10 minutes.
.IP
If multiple mail files are specified, then the shell says
`New mail in
.IR name '
when there is mail in the file
.I name.
.TP 15
.B noclobber
\c
As described in the section on
.I Input/output,
restrictions are placed on output redirection to insure that
files are not accidentally destroyed, and that `>>' redirections
refer to existing files.
.TP 15
.B noglob
\c
If set, filename expansion is inhibited.
This is most useful in shell scripts which are not dealing with filenames,
or after a list of filenames has been obtained and further expansions
are not desirable.
.TP 15
.B nonomatch
\c
If set, it is not an error for a filename expansion to not match any
existing files; rather the primitive pattern is returned.
It is still an error for the primitive pattern to be malformed, i.e.
`echo [' still gives an error.
.TP 15
.B path
\c
Each word of the path variable specifies a directory in which
commands are to be sought for execution.
A null word specifies the current directory.
If there is no
.I path
variable then only full path names will execute.
The usual search path is `.', `/bin' and `/usr/bin', but this
may vary from system to system.
For the super-user the default search path is `/etc', `/bin' and `/usr/bin'.
A shell which is given neither the
.B \-c
nor the
.B \-t
option will normally hash the contents of the directories in the
.I path
variable after reading
.I \&.cshrc,
and each time the
.I path
variable is reset.  If new commands are added to these directories
while the shell is active, it may be necessary to give the
.I rehash
or the commands may not be found.
.TP 15
.B prompt
\c
The string which is printed before each command is read from
an interactive terminal input.
If a `!' appears in the string it will be replaced by the current event number
unless a preceding `\e' is given.
Default is `% ', or `# ' for the super-user.
.TP 15
.B shell
\c
The file in which the shell resides.
This is used in forking shells to interpret files which have execute
bits set, but which are not executable by the system.
(See the description of
.I "Non-builtin Command Execution"
below.)
Initialized to the (system-dependent) home of the shell.
.TP 15
.B status
\c
The status returned by the last command.
If it terminated abnormally, then 0200 is added to the status.
Builtin commands which fail return exit status `1',
all other builtin commands set status `0'.
.TP 15
.B time
\c
Controls automatic timing of commands.
If set, then any command which takes more than this many cpu seconds
will cause a line giving user, system, and real times and a utilization
percentage which is the ratio of user plus system times to real time
to be printed when it terminates.
.TP 15
.B verbose
\c
Set by the
.B \-v
command line option, causes the words of each command to be printed
after history substitution.
.PP
.B "Non-builtin command execution"
.PP
When a command to be executed is found to not be a builtin command
the shell attempts to execute the command via
.IR  execve (2).
Each word in the variable
.I path
names a directory from which the shell will attempt to execute the command.
If it is given neither a
.B \-c
nor a
.B \-t
option, the shell will hash the names in these directories into an internal
table so that it will only try an
.I exec
in a directory if there is a possibility that the command resides there.
This greatly speeds command location when a large number of directories
are present in the search path.
If this mechanism has been turned off (via
.I unhash),
or if the shell was given a
.B \-c
or
.B \-t
argument, and in any case for each directory component of
.I path
which does not begin with a ``/'',
the shell concatenates with the given command name to form a path name
of a file which it then attempts to execute.
.PP
Parenthesized commands are always executed in a subshell.
Thus `(cd ; pwd) ; pwd' prints the
.I home
directory; leaving you where you were (printing this after the home directory),
while `cd ; pwd' leaves you in the
.I home
directory.
Parenthesized commands are most often used to prevent
.I chdir
from affecting the current shell.
.PP
If the file has execute permissions but is not an
executable binary to the system, then it is assumed to be a
file containing shell commands an a new shell is spawned to read it.
.PP
If there is an
.I alias
for
.I shell
then the words of the alias will be prepended to the argument list to form
the shell command.
The first word of the
.I alias
should be the full path name of the shell
(e.g. `$shell').
Note that this is a special, late occurring, case of
.I alias
substitution,
and only allows words to be prepended to the argument list without modification.
.PP
.B "Argument list processing"
.PP
If argument 0 to the shell is `\-' then this
is a login shell.
The flag arguments are interpreted as follows:
.TP 5
.B  \-\^c
\c
Commands are read from the (single) following argument which must
be present.
Any remaining arguments are placed in
.I argv.
.TP 5
.B  \-\^e
\c
The shell exits if any invoked command terminates abnormally
or yields a non-zero exit status.
.TP 5
.B  \-\^f
\c
The shell will start faster, because it will neither search for nor
execute commands from the file
`\&.cshrc' in the invokers home directory.
.TP 5
.B  \-\^i
\c
The shell is interactive and prompts for its top-level input,
even if it appears to not be a terminal.
Shells are interactive without this option if their inputs
and outputs are terminals.
.TP 5
.B  \-\^n
\c
Commands are parsed, but not executed.
This may aid in syntactic checking of shell scripts.
.TP 5
.B  \-\^s
\c
Command input is taken from the standard input.
.TP 5
.B  \-\^t
\c
A single line of input is read and executed.
A `\e' may be used to escape the newline at the end of this
line and continue onto another line.
.TP 5
.B  \-\^v
\c
Causes the
.I verbose
variable to be set, with the effect
that command input is echoed after history substitution.
.TP 5
.B  \-\^x
\c
Causes the 
.I echo
variable to be set, so that commands are echoed immediately before execution.
.TP 5
.B  \-\^V
\c
Causes the
.I verbose
variable to be set even before `\&.cshrc' is executed.
.TP 5
.B  \-\^X
\c
Is to
.B \-x
as
.B \-V
is to
.B \-v.
.PP
After processing of flag arguments if arguments remain but none of the
.B \-c,
.B \-i,
.B \-s,
or
.B \-t
options was given the first argument is taken as the name of a file of
commands to be executed.
The shell opens this file, and saves its name for possible resubstitution
by `$0'.
Since many systems use either the standard version 6 or version 7 shells
whose shell scripts are not compatible with this shell, the shell will
execute such a `standard' shell if the first character of a script
is not a `#', i.e. if the script does not start with a comment.
Remaining arguments initialize the variable
.I argv.
.PP
.B "Signal handling"
.PP
The shell normally ignores
.I quit
signals.
The
.I interrupt
and
.I quit
signals are ignored for an invoked command
if the command is followed by `&';
otherwise the signals have the values which the shell inherited
from its parent.
The shells handling of interrupts can be controlled by
.I onintr.
Login shells catch the
.I terminate
signal; otherwise this signal is passed on to children from the state in the
shell's parent.
In no case are interrupts allowed when a login shell is reading the file
`\&.logout'.
.SH AUTHOR
William Joy
.SH FILES
.ta 1.75i
.nf
~/.cshrc	Read at beginning of execution by each shell.
~/.login	Read by login shell, after `.cshrc' at login.
~/.logout	Read by login shell, at logout.
/bin/sh	Standard shell, for shell scripts not starting with a `#'.
/tmp/sh*	Temporary file for `<<'.
/dev/null	Source of empty file.
/etc/passwd	Source of home directories for `~name'.
.fi
.SH LIMITATIONS
Words can be no longer than 1024 characters.
The number of characters in an argument varies from system to system.
Early version 6 systems typically have 512 character limits
while later version 6 and version 7 systems have 5120 character limits.
The number of arguments to a command which involves filename expansion
is limited to 1/8'th the number of characters allowed in an argument list.
Also command substitutions may substitute no more characters than are
allowed in an argument list.
.PP
To detect looping, the shell restricts the number of
.I alias
substitutions on a single line to 20.
.SH "SEE ALSO"
access(2), execve(2), fork(2), pipe(2), signal(2), umask(2), wait(2),
exec(3), a.out(5), environ(5),
`An introduction to the C shell'
.SH BUGS
Control structure should be parsed rather than being recognized as built-in
commands.  This would allow control commands to be placed anywhere,
to be combined with `|', and to be used with `&' and `;' metasyntax.
.PP
Commands within loops, prompted for by `?', are not placed in the
.I history
list.
.PP
It should be possible to use the `:' modifiers on the output of command
substitutions.
All and more than one `:' modifier should be allowed on `$' substitutions.
.PP
Some commands should not touch
.I status
or it may be so transient as to be almost useless.
Oring in 0200 to
.I status
on abnormal termination is a kludge.
.PP
In order to be able to recover from failing
.I exec
commands on version 6 systems, the new command inherits several
open files other than the normal standard input and output and diagnostic 
output.
If the input and output are redirected and the new command does not
close these files, some files may be held open unnecessarily.
.PP
There are a number of bugs associated with the importing/exporting
of the PATH.
For example, directories in the path using the ~
syntax are not expanded in the PATH.
Unusual paths,
such as (), can cause oldcsh to core dump.
.PP
This version of
.I oldcsh
does not support or use the process control features
of the 4th Berkeley Distribution.
It contains a number of known bugs which
have been fixed in the process control version.