.TH STTY 1
.UC
.SH NAME
stty \- set terminal options
.SH SYNOPSIS
.B stty
[ option ... ]
.SH DESCRIPTION
.I Stty
sets certain I/O options on the current output terminal,
placing its output on the diagnostic output.
With no argument, it reports the speed of the terminal and the
settings of the options which are different from their defaults.
With the argument ``all'', all normally used option settings are reported.
With the argument ``everything'', everything
.I stty
knows about is printed.
The option strings are
selected from the following set:
.TP  10
.B even 
allow even parity input
.br
.ns
.TP 10
.B \-\^even 
disallow even parity input
.br
.ns
.TP 10
.B odd 
allow odd parity input
.br
.ns
.TP 10
.B \-\^odd 
disallow odd parity input
.br
.ns
.TP 10
.B raw 
raw mode input
(\fBno\fP input processing (erase, kill, interrupt, ...); parity bit passed back)
.br
.ns
.TP 10
.B \-\^raw 
negate raw mode
.br
.ns
.TP 10
.B cooked 
same as `\-raw'
.br
.ns
.TP 10
.B cbreak
make each character available to
.IR read (2)
as received; no erase and kill processing,
but all other processing (interrupt, suspend, ...) is performed
.br
.ns
.TP 10
.B \-\^cbreak
make characters available to 
.I read
only when newline is received
.br
.ns
.TP 10
.B \-\^nl 
allow carriage return for new-line,
and output CR-LF for carriage return or new-line
.br
.ns
.TP 10
.B nl 
accept only new-line to end lines
.br
.ns
.TP 10
.B echo 
echo back every character typed
.br
.ns
.TP 10
.B \-\^echo 
do not echo characters
.br
.ns
.TP 10
.B lcase 
map upper case to lower case
.br
.ns
.TP 10
.B \-\^lcase 
do not map case
.br
.ns
.TP 10
.B tandem
enable flow control, so that the system sends out the stop character when
its internal queue is in danger of overflowing on input, and sends the
start character when it is ready to accept further input
.br
.ns
.TP 10
.B \-\^tandem
disable flow control
.br
.ns
.TP 10
.B \-\^tabs 
replace tabs by spaces when printing
.br
.ns
.TP 10
.B tabs 
preserve tabs
.br
.ns
.TP 10
.B ek 
set erase and kill characters to # and @
.br
.ns
.PP
For the following commands which take a character argument \fIc\fP,
you may also specify \fIc\fP as the ``u'' or ``undef'', to set the value
to be undefined.  A value of ``^x'', a 2 character sequence, is also
interpreted as a control character, with ``^?'' representing delete.
.TP 10
.BI erase \ c\fP
set erase character to
.I c
(default `#', but often reset to ^H.)
.br
.ns
.TP 10
.BI kill \ c\fP
set kill character to
.I c
(default `@', but often reset to ^U.)
.br
.ns
.TP 10
.BI intr \ c\fP
set interrupt character to
.I c
(default DEL or ^? (delete), but often reset to ^C.)
.br
.ns
.TP 10
.BI quit \ c\fP
set quit character to
.I c
(default control \e.)
.br
.ns
.TP 10
.BI start \ c\fP
set start character to
.I c
(default control Q.)
.br
.ns
.TP 10
.BI stop \ c\fP
set stop character to
.I c
(default control S.)
.br
.ns
.TP 10
.BI eof \ c\fP
set end of file character to
.I c
(default control D.)
.br
.ns
.TP 10
.BI brk \ c\fP
set break character to
.I c
(default undefined.)
This character is an extra wakeup causing character.
.br
.ns
.TP 10
.B  cr0 cr1 cr2 cr3
.br
select style of delay for carriage return (see
.IR ioctl (2))
.br
.ns
.TP 10
.B  nl0 nl1 nl2 nl3
.br
select style of delay for linefeed 
.br
.ns
.TP 10
.B  tab0 tab1 tab2 tab3
.br
select style of delay for tab 
.br
.ns
.TP 10
.B  ff0 ff1
select style of delay for form feed 
.br
.ns
.TP 10
.B bs0 bs1
select style of delay for backspace
.br
.TP 10
.B tty33 
set all modes suitable for the
Teletype Corporation Model 33 terminal.
.br
.ns
.TP 10
.B tty37 
set all modes suitable for the
Teletype Corporation Model 37 terminal.
.br
.ns
.TP 10
.B vt05 
set all modes suitable for Digital Equipment Corp. VT05 terminal
.br
.ns
.TP 10
.B dec
set all modes suitable for Digital Equipment Corp. operating systems
users; (erase, kill, and interrupt characters to ^?, ^U, and ^C,
decctlq and ``newcrt''.)
.ns
.TP 10
.B tn300 
set all modes suitable for a General Electric TermiNet 300
.br
.ns
.TP 10
.B ti700 
set all modes suitable for Texas Instruments 700 series terminal
.br
.ns
.TP 10
.B tek 
set all modes suitable for Tektronix 4014 terminal
.br
.ns
.TP 10
.B 0 
hang up phone line immediately
.br
.ns
.TP 10
.B  "50 75 110 134 150 200 300 600 1200 1800 2400 4800 9600 exta extb"
.br
Set terminal baud rate to the number given, if possible.
(These are the speeds supported by the DH-11 interface).
.PP
A teletype driver which supports the job control processing of
.IR csh (1)
as introduced in
.IR newcsh (1)
and more functionality that the basic driver is introduced in
.IR newtty (4)
and fully described in
.IR tty (4).
The following options apply only to it.
.TP 10
.B new
Use new driver (switching flushes typeahead).
.br
.ns
.TP 10
.B crt
Set options for a CRT (crtbs, ctlecho and, if >= 1200 baud,
crterase and crtkill.)
.br
.ns
.TP 10
.B crtbs
Echo backspaces on erase characters.
.br
.ns
.TP 10
.B prterase
For printing terminal echo erased characters backwards within ``\e'' and ``/''.
.br
.ns
.TP 10
.B crterase
Wipe out erased characters with ``backspace-space-backspace.''
.br
.ns
.TP 10
.B \-\^crterase
Leave erased characters visible; just backspace.
.br
.ns
.TP 10
.B crtkill
Wipe out input on like kill ala
.B crterase.
.br
.ns
.TP 10
.B \-\^crtkill
Just echo line kill character and a newline on line kill.
.br
.ns
.TP 10
.B ctlecho
Echo control characters as ``^\fIx\fP'' (and delete as ``^?''.)
Print two backspaces following the EOT character (control D).
.br
.ns
.TP 10
.B \-\^ctlecho
Control characters echo as themselves; in cooked mode EOT (control-D)
is not echoed.
.TP 10
.B decctlq
After output is suspended (normally by ^S), only a start character
(normally ^Q) will restart it.  This is compatible with DEC's vendor
supplied systems.
.TP 10
.B \-\^decctlq
After output is suspended, any character typed will restart it;
the start character will restart output without providing any input.
(This is the default.)
.br
.ns
.TP 10
.B tostop
Background jobs stop if they attempt terminal output.
.br
.ns
.TP 10
.B \-\^tostop
Output from background jobs to the terminal is allowed.
.br
.ns
.TP 10
.B tilde
Convert ``~'' to ``\`'' on output (for Hazeltine terminals).
.br
.ns
.TP 10
.B \-\^tilde
Leave poor ``~'' alone.
.br
.ns
.TP 10
.B flusho
Output is being discarded usually because user hit control O (internal state bit).
.br
.ns
.TP 10
.B \-\^flusho
Output is not being discarded.
.br
.ns
.TP 10
.B pendin
Input is pending after a switch from cbreak to cooked 
and will be re-input when a read becomes pending or more input arrives
(internal state bit).
.br
.ns
.TP 10
.B \-\^pendin
Input is not pending.
.br
.ns
.TP 10
.B intrup
Send a signal (SIGTINT) to the terminal control process group whenever
an input record (line in cooked mode, character in cbreak or raw mode)
is available for reading.
.br
.ns
.TP 10
.B \-\^intrup
Don't send input available interrupts.
.br
.ns
.TP 10
.B mdmbuf
Start/stop output on carrier transitions (not implemented).
.br
.ns
.TP 10
.B \-\^mdmbuf
Return error if write attempted after carrier drops.
.br
.ns
.TP 10
.B litout
Send output characters without any processing.
.br
.ns
.TP 10
.B \-\^litout
Do normal output processing, inserting delays, etc.
.br
.ns
.TP 10
.B nohang
Don't send hangup signal if carrier drops.
.br
.ns
.TP 10
.B \-\^nohang
Send hangup signal to control process group when carrier drops.
.br
.ns
.TP 10
.B etxack
Diablo style etx/ack handshaking (not implemented).
.PP
The following special characters are applicable only to the new
teletype driver
and are not normally changed.
.TP 10
.BI susp \ c\fP
set suspend process character to \fIc\fP (default control Z.)
.br
.ns
.TP 10
.BI dsusp \ c\fP
set delayed suspend process character to \fIc\fP (default control Y.)
.br
.ns
.TP 10
.BI rprnt \ c\fP
set reprint line character to \fIc\fP (default control R.)
.br
.ns
.TP 10
.BI flush \ c\fP
set flush output character to \fIc\fP (default control O.)
.br
.ns
.TP 10
.BI werase \ c\fP
set word erase character to \fIc\fP (default control W.)
.br
.ns
.TP 10
.BI lnext \ c\fP
set literal next character to \fIc\fP (default control V.)
.SH "SEE ALSO"
tabs(1), tset(1), ioctl(2), newtty(4), tty(4)