TMSCP(4) TMSCP(4) NAME tmscp - DEC TMSCP magtape interface SYNOPSIS controller tmscp0 at uba? csr 0174500 vector tmscpintr tape tms0 at tmscp0 drive 0 DESCRIPTION Tape controllers compatible with the DEC Tape Mass Storage Control Pro‐ tocol (TMSCP) architecture such as the TU81 and the TK50 provide a standard tape drive interface as described in _m_t_i_o(4). The controller communicates with the host through a packet oriented protocol. Consult the file _ for a detailed description of this protocol. DIAGNOSTICS tmscp controller failed to init. The controller initialization proce‐ dure failed. This probably indicates a hardware problem. tmscp%d: sa 0%o, state %d. (Additional status information given after a hard I/O error.) The values of the controller status register and the internal driver state are printed. tmscp%d: random interrupt ignored. An unexpected interrupt was received (e.g. when no i/o was pending). The interrupt is ignored. tmscp%d: interrupt in unknown state %d ignored. An interrupt was received when the driver was in an unknown internal state. Indicates a hardware problem or a driver bug. tmscp%d: fatal error (0%o). The controller detected a ‘‘fatal error’’ in the status returned to the host. The contents of the status regis‐ ter are displayed. OFFLINE. (Additional status information given after a hard I/O error.) A hard I/O error occurred because the drive was not on-line. The following errors are interpretations of TMSCP error messages returned by the controller to the host. Each is preceded by either tmscp%d: hard error or tmscp%d: soft error. controller error, event 0%o. host memory access error, event 0%o, addr 0%o. tape transfer error, unit %d, grp 0x%x, event 0%o. STI error, unit %d, event 0%o. STI Drive Error Log, unit %d, event 0%o. STI Formatter Error Log, unit %d, event 0%o. unknown error, unit %d, format 0%o, event 0%o. SEE ALSO mt(1), tar(1), tp(1), mtio(4), tm(4), ts(4), ut(4), dmesg(8) 4.3 Berkeley Distribution June 4, 1986 TMSCP(4)