.bp
.sh 1 "Creating \*(IP masters from C Programs"
.lp
A series of C macros and subroutines have been incorporated into a flexible
software interface for use in the creation of Interpress masters.  This
interface provides a facility for higher level software to create Interpress
masters and eliminates the need for knowledge of the actual encoding of
the file.  The set of routines resembles the proposal for an Interpress
procedural interface outlined in the
.i
Introduction to Interpress,
.r
\s8XSIG\s0 038404 Section 7 "Creating masters: procedural interfaces".
.lp
Since this document makes references to the actual Interpress
encoding form, it is assumed that the reader has knowledge of
the encoding of Interpress within a file as described in the
.i
Interpress Electronic Printing Standard,
.r
\s8XSIS\s0 048404, Section 2.5.
.sh 2 Basics
.lp
The Interpress procedure interface described is organized as that described
in Section 7 of the
.i
Introduction to Interpress,
.r
\s8XSIG\s0 038404.
.lp
There are two levels of interfaces:
.RS
.ip \(bu
The
.i Literal
interface which provides procedures for creating the various Interpress tokens
(i.e., operators, numbers, identifiers, etc.)
.ip \(bu
The
.i Operator
interface which provides procedures for the creation of specific operators
with an associated value or values.
.RE
.lp
The following conventions are used in the descriptions of these interfaces:
.RS
.RS
.ip n:
floating point numbers represented by the C type double (32 bits)
.ip i:
integers represented by the C type long (32 bits)
.ip s:
character strings which are null terminated
.RE
.RE
.sh 2 "Literal Interface"
.lp
The literal interface is a series of routines which append
the various Interpress types to the output file.  These routines
perform the actual encoding dependent upon the literal type. 
.lp
The routines which comprise the literal interface are:
.RS
.ip \fIip_select\fR(i:\ fd) 45
select the output file represented by the file descriptor fd and append the
Interpress header
.ip \fIip_raw_select\fR(i:\ fd) 45
select the output file represented by the file descriptor fd (does not append
an Interpress header)
.ip \fIip_close\fR() 45
close an output file
.ip \fIip_flush\fR() 45
flush current output buffer to the file
.pp
.pp
.ip \fIAppendOp\fR(i:\ operator) 45
append operator in its proper form (either a Short Op or a Long Op)
.ip \fIOp\fR(s:\ name) 45
a macro which will call \fIAppendOp\fR with "OP_`name'" as the operator 
.ip \fIAppendNumber\fR(n:\ number) 45
append the number in its proper form (either as a Short Number, a sequence of
type sequenceInteger or a sequence of type sequenceRational)
.ip \fIAppendInteger\fR(i:\ integer) 45
append the integer in its proper form (either as a Short Number or a sequence
of type sequenceInteger)
.ip \fIAppendRational\fR(n:\ numerator,\ n:\ denominator) 45
append value and divisor as a sequence of type sequenceRational
.ip \fIAppendIdentifier\fR(s:\ string) 45
append string as a sequence of type sequenceIdentifier
.ip \fIAppendComment\fR(s:\ string) 45
append string as a sequence of type sequenceComment
.ip \fIAppendString\fR(s:\ string) 45
append string as a sequence of type sequenceString
.ip \fIAppendInsertFile\fR(s:\ string) 45
append string as a sequence of type sequenceInsertFile
.RE
.sh 2 "Operator Interface"
.lp
Many of the common Interpress primitive operators have a corresponding routine
in the operator interface which allows the operator and a series of value(s) 
to be appended to the output file.
.lp
Interpress operators vary in their use in that several options are available:
.RS
.ip \(bu
the operators may not require any values to be associated with it
.ip \(bu
values may be provided explicitly and a resulting value left on the stack
.ip \(bu
any or all values may be taken from the stack (left by a previous operation)
and the result of the operator may then be left on the stack in place of 
the values
.ip \(bu
the values provided may in fact be a larger body of values composed of many
numbers or integers
.RE
.lp
.i
Operators with no values:
.r
Operators which require no values may be output with the literal interface 
routines \fIAppendOp\fR or \fIOp\fR.
.lp
.i
Operators with explicit values:
.r
The following routines will append the named operator along with the values
specified:
.RS
.lp
.b
Arithmetic Operators
.RS
.ip \fIAbs\|(n:\ value)\fR
.ip \fIAdd\|(n:\ value1,\ n:\ value2)\fR
.ip \fICeiling\|(n:\ value)\fR
.ip \fIDiv\|(n:\ dividend,\ n:\ divisor)\fR
.ip \fIFloor\|(n:\ value)\fR
.ip \fIMod\|(n:\ value,\ n:\ divisor)\fR
.ip \fIMul\|(n:\ value1,\ n:\ value2)\fR
.ip \fINeg\|(n:\ value)\fR
.ip \fIRem\|(n:\ value,\ n:\ divisor)\fR
.ip \fIRound\|(n:\ value)\fR
.ip \fISub\|(n:\ minuend,\ n:\ subtrahend)\fR
.ip \fITrunc\|(n:\ value)\fR
.RE
.lp
.b
Color Operators
.RS
.ip \fIMakegray\|(n:\ colorshade)\fR
.ip \fIMakesampledblack\|(i:\ clear)\fR
.ip \fISetgray\|(n:\ colorshade)\fR
.RE
.lp
.b
Correction Operators
.RS
.ip \fICorrectspace\|(n:\ x,\ n:\ y)\fR
.ip \fISetcorrectmeasure\|(n:\ x,\ n:\ y)\fR
.ip \fISetcorrecttolerance\|(n:\ x,\ n:\ y)\fR
.ip \fISpace\|(n:\ x)\fR
.RE
.lp
.b
Font Operators
.RS
.ip \fISetfont(i:\ font)\fR
.RE
.lp
.b
Frame Operators
.RS
.ip \fIFget\|(i:\ framevariable)\fR
.RE
.lp
.b
Imager Operators
.RS
.ip \fIIget\|(i:\ imagervariable)\fR
.ip \fISetamplifyspace\|(n:\ value)\fR
.ip \fISetcorrectpass\|(i:\ value)\fR
.ip \fISetcorreectshrink\|(n:\ number)\fR
.ip \fISetnoimage\|(i:\ integer)\fR
.ip \fISetpriorityimportant\|(i:\ integer)\fR
.ip \fISetstrokeend\|(i:\ integer)\fR
.ip \fISetstrokewidth\|(n:\ number)\fR
.ip \fISetunderlinestart\|(n: number)\fR
.RE
.lp
.b
Mask Operators
.r
.RS
.ip \fIMaskrectangle\|(n:\ x,\ n:\ y,\ n:\ width,\ n:\ height)\fR
.ip \fIMasktrapezoidx\|(n:\ x1,\ n:\ y1,\ n:\ x2,\ n:\ x3,\ n:\ y3,\ n:\ x4)\fR
.ip \fIMasktrapezoidy\|(n:\ x1,\ n:\ y1,\ n:\ y2,\ n:\ x3,\ n:\ y3,\ n:\ y4)\fR
.ip \fIMaskunderline\|(n:\ dy,\ n:\ h)\fR
.ip \fIMaskvector\|(n:\ x1,\ n:\ y1,\ n:\ x2,\ n:\ y2)\fR
.RE
.lp
.b
Position Operators
.RS
.ip \fISetxy\|(n:\ x,\ n:\ y)\fR
.ip \fISetxyrel\|(n:\ dx,\ n:\ dy)\fR
.ip \fISetxrel\|(n:\ dx)\fR
.ip \fISetyrel\|(n:\ dy)\fR
.RE
.lp
.b
Test Operators
.RS
.ip \fIAnd\|(i:\ value1,\ i:\ value2)\fR
.ip \fIGe\|(n:\ value1,\ n:\ value2)\fR
.ip \fIGt\|(n:\ value2,\ n:\ value2)\fR
.ip \fINot\|(i:\ value)\fR
.ip \fIOr\|(i:\ value1,\ i:\ value2)\fR
.RE
.lp
.b
Transform Operators
.RS
.ip \fIRotate\|(n:\ angle)\fR
.ip \fIScale\|(n:\ s)\fR
.ip \fIScale2\|(n:\ sx,\ n:\ sy)\fR
.ip \fITranslate\|(n:\ x,\ n:\ y)\fR
.RE
.RE
.lp
.i
Operators with implicit values:
.r
The following routines append the named operator along with the values
specified, with the assumption that other values have been appended through
previous calls to the literal interface:
.RS
.lp
.b
Mask Operators
.RS
.ip \fILineto\|(n:\ x,\ n:\ y)\fR
.ip \fILinetox\|(n:\ x)\fR
.ip \fILinetoy\|(n:\ y)\fR
.ip \fIMakeoutline\|(i:\ count)\fR
.RE
.lp
.b
Stack Operators
.RS
.ip \fICopy\|(i:\ count)\fR
.ip \fIRoll\|(i:\ depth,\ i:\ movefirst)\fR
.ip \fIMark\|(i:\ count)\fR
.ip \fIUnmark\|(i:\ count)\fR
.RE
.lp
.b
Vector Operators
.RS
.ip \fIGet\|(n:\ index)\fR
.ip \fIMakevec\|(I:\ upper)\fR
.ip \fIMakeveclu\|(i:\ lower,\ i:\ upper)\fR
.RE
.RE
.lp
.i
Templates:
.r
Several procedures are provided for common Interpress operations which may
logically combine groups of operators and values.  Those procedures are:
.RS
.ip \fISetupFont\|(s:\ name,\ i:\ size,\ i:\ fontnumber)\fR
.ip \fIShowString\|(s:\ string)\fR
.RE
.sh 2 "Using the Program Interface"
.lp
The software which uses these Interpress interfaces can find the
the desired subroutines in the Interpress library
.i libip.a
which exists in the directory
.i ${SRC}/lib
as distributed.
.lp
There are also several include files in the directory
.i ${SRC}/include
which contain the following utilities:
.RS
.ip iptokens.h
definitions for the Interpress encoding of tokens, sequence types and operators
.ip literal.h
macro definitions for portions of the literal interface 
.ip operator.h
macro definitions for most of the operator interface
.RE
.lp
.i
Note that ${SRC} above denotes the path in which the Interpress software was
loaded on the host system.
.r
.sh 3 "An example using the program interfaces"
.lp
The following short C program demonstrates an Interpress
generation facility. This will produce an Interpress master on the file
descriptor stdout which will print the line "This is an Interpress test"
across the top of the page.
.in +5n
.lp
#include "iptokens.h"
.br
#include "literal.h"
.br
#include "operator.h"
.br
main()
.br
{
.in +5n
ip_select(1);	/* open stdout */
.br
Op(beginBlock);
.br
Op(beginBody);
.br
SetupFont("Xerox/XC1-1-1/Classic",100.,1);	/* establish default font */
.br
AppendRational(353,10000000);	/* scale of 1/10 point */
.br
Op(scale);
.br
AppendInteger(2);
.br
Op(fset);	/* save in frame variable 2 */
.br
Op(endBody);	/* end preamble */
.br
Op(beginBody);	/* start page 1 */
.br
Fget(2);	/* retrieve scale */
.br
Setfont(1);	/* retrieve default font */
.br
Setxy((double)1440,(double)7200);
.br
ShowString("This is an Interpress test");
.br
Op(endBody);
.br
Op(endBlock);
.br
ip_close();	/* close file */
.in -5n
}
.in -5n