tbu_rlink_sp1c.vhd

Go to the documentation of this file.

-- $Id: tbu_rlink_sp1c.vhd 1181 2019-07-08 17:00:50Z mueller $
-- SPDX-License-Identifier: GPL-3.0-or-later
-- Copyright 2007-2015 by Walter F.J. Mueller <W.F.J.Mueller@gsi.de>
--
------------------------------------------------------------------------------
-- Module Name:    tbu_rlink_sp1c - syn
-- Description:    Wrapper for rlink_sp1c to avoid records.
--                 It has a port interface which will not be modified by xst
--                 synthesis (no records, no generic port).
--
-- Dependencies:   rlink_sp1c
--
-- To test:        rlink_sp1c
--
-- Target Devices: generic
--
-- Synthesized (xst):
-- Date         Rev  ise         Target      flop lutl lutm slic t peri
-- 2011-12-22   442  13.1   O40d xc3s1000-4   348  704   64  473 s 9.08
-- 2010-04-03   274  11.4   L68  xc3s1000-4   278  588   18  366 s 9.83
-- 2007-10-27    92  9.2.02 J39  xc3s1000-4   273  547   18    - t 9.65
-- 2007-10-27    92  9.1    J30  xc3s1000-4   273  545   18    - t 9.65
-- 2007-10-27    92  8.2.03 I34  xc3s1000-4   283  594   18  323 s 10.3
-- 2007-10-27    92  8.1.03 I27  xc3s1000-4   285  596   18    - s 9.32
--
-- Tool versions:  xst 8.2-14.7; ghdl 0.18-0.31
--
-- Revision History: 
-- Date         Rev Version  Comment
-- 2015-04-11   666   4.1    rename ENAESC->ESCFILL
-- 2014-08-31   590   4.0    now full rlink v4 iface, 4 bit STAT
-- 2014-08-15   583   3.5    rb_mreq addr now 16 bit
-- 2011-12-22   442   3.2    renamed and retargeted to test rlink_sp1c
-- 2011-11-19   427   3.1.2  now numeric_std clean
-- 2010-12-28   350   3.1.1  use CLKDIV/CDINIT=0;
-- 2010-12-26   348   3.1    use rlink_base now; add RTS/CTS ports
-- 2010-12-24   347   3.0.1  rename: CP_*->RL->*
-- 2010-12-05   343   3.0    rri->rlink renames; port to rbus V3 protocol;
-- 2010-06-03   300   2.2.3  use default FAWIDTH for rri_core_serport
-- 2010-05-02   287   2.2.2  ren CE_XSEC->CE_INT,RP_STAT->RB_STAT,AP_LAM->RB_LAM
--                           drop RP_IINT from interfaces; drop RTSFLUSH generic
-- 2010-04-18   279   2.2.1  drop RTSFBUF generic for rri_serport
-- 2010-04-03   274   2.2    add CP_FLUSH, add rri_serport handshake logic
-- 2009-03-14   197   2.1    remove records in interface to allow _ssim usage
-- 2008-08-24   162   2.0    with new rb_mreq/rb_sres interface
-- 2007-11-24    98   1.1    added RP_IINT support
-- 2007-07-02    63   1.0    Initial version 
------------------------------------------------------------------------------
 
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
 
use work.slvtypes.all;
use work.rblib.all;
use work.rlinklib.all;
 
entity tbu_rlink_sp1c is                -- rlink core+serport combo
  port (
    CLK  : in slbit;                    -- clock
    CE_INT : in slbit;                  -- rlink ito time unit clock enable
    CE_USEC : in slbit;                 -- 1 usec clock enable
    CE_MSEC : in slbit;                 -- 1 msec clock enable
    RESET  : in slbit;                  -- reset
    RXSD : in slbit;                    -- receive serial data      (board view)
    TXSD : out slbit;                   -- transmit serial data     (board view)
    CTS_N : in slbit;                   -- clear to send   (act.low, board view)
    RTS_N : out slbit;                  -- request to send (act.low, board view)
    RB_MREQ_aval : out slbit;           -- rbus: request - aval
    RB_MREQ_re : out slbit;             -- rbus: request - re
    RB_MREQ_we : out slbit;             -- rbus: request - we
    RB_MREQ_initt: out slbit;           -- rbus: request - init; avoid name coll
    RB_MREQ_addr : out slv16;           -- rbus: request - addr
    RB_MREQ_din : out slv16;            -- rbus: request - din
    RB_SRES_ack : in slbit;             -- rbus: response - ack
    RB_SRES_busy : in slbit;            -- rbus: response - busy
    RB_SRES_err : in slbit;             -- rbus: response - err
    RB_SRES_dout : in slv16;            -- rbus: response - dout
    RB_LAM : in slv16;                  -- rbus: look at me
    RB_STAT : in slv4                   -- rbus: status flags
  );
end entity tbu_rlink_sp1c;
 
 
architecture syn of tbu_rlink_sp1c is
 
  constant CDWIDTH : positive := 13;
  constant c_cdinit : natural := 0;   -- NOTE: change in tbd_rlink_sp1c !!
 
  signal RB_MREQ : rb_mreq_type := rb_mreq_init;
  signal RB_SRES : rb_sres_type := rb_sres_init;
 
  signal RLB_DI : slv8 := (others=>'0');
  signal RLB_ENA : slbit := '0';
  signal RLB_BUSY : slbit := '0';
  signal RLB_DO : slv8 := (others=>'0');
  signal RLB_VAL : slbit := '0';
  signal RLB_HOLD : slbit := '0';
  
begin
 
  RB_MREQ_aval <= RB_MREQ.aval;
  RB_MREQ_re   <= RB_MREQ.re;
  RB_MREQ_we   <= RB_MREQ.we;
  RB_MREQ_initt<= RB_MREQ.init;
  RB_MREQ_addr <= RB_MREQ.addr;
  RB_MREQ_din  <= RB_MREQ.din;
 
  RB_SRES.ack  <= RB_SRES_ack;
  RB_SRES.busy <= RB_SRES_busy;
  RB_SRES.err  <= RB_SRES_err;
  RB_SRES.dout <= RB_SRES_dout;
 
  RLINK : rlink_sp1c
    generic map (
      BTOWIDTH     =>  5,
      RTAWIDTH     => 11,
      SYSID        => x"76543210",
      IFAWIDTH     => 5,
      OFAWIDTH     => 5,
      ENAPIN_RLMON => sbcntl_sbf_rlmon,
      ENAPIN_RLBMON=> sbcntl_sbf_rlbmon,
      ENAPIN_RBMON => sbcntl_sbf_rbmon,
      CDWIDTH      => 15,
      CDINIT       => c_cdinit)
    port map (
      CLK      => CLK,
      CE_USEC  => CE_USEC,
      CE_MSEC  => CE_MSEC,
      CE_INT   => CE_INT,
      RESET    => RESET,
      ENAXON   => '0',
      ESCFILL  => '0',
      RXSD     => RXSD,
      TXSD     => TXSD,
      CTS_N    => CTS_N,
      RTS_N    => RTS_N,
      RB_MREQ  => RB_MREQ,
      RB_SRES  => RB_SRES,
      RB_LAM   => RB_LAM,
      RB_STAT  => RB_STAT,
      RL_MONI  => open
  --  SER_MONI => open  -- ISE 13.1 err's when a second record is mapped open
    );
 
end syn;